Individual elements of the GripTil floor system are connected each to other by plastic connectors, which are inserted from the underside into slots along the side of the element. The connector is not part of the element, so if it is damaged, it is not necessary to replace the entire element. The couplings are always included in the delivery in the recommended quantity. They can also be ordered separately.
More
Product code: TX010
The Plastic Connector serves to join the individual modules of the GripTil floor system. The connectors are inserted from the underside into the slots around the edge of the modules so they are not visible from the top.
It is not necessary to insert the connectors in all prepared slots for common connections. However, if the floor is extremely stressed or is designated for mobile use, the connectors are applied to all slots. This fact should be noted when ordering, normally the floor is only supplied with the number of connectors specified in the module description.
The same connectors are used for all types of floors and modules. These are not part of the module, so it is not necessary to replace the entire module if damaged during use or assembly. The connectors are always included in the recommended quantity. They can also be ordered separately.
Installation is very simple and it takes approximately 2 minutes to install 1 square meter. Disassembly is just as easy.
If the surface is irregular in shape, the required shapes are simply cut with a knife or saw. The individual segments of the system are connected together by plastic connectors, which are included in delivery to each segment.
When installing the floor in areas with temperature fluctuations, it is necessary to take into account the expansion according to the type of material approx. 2-4 mm/1m.
| Color |
|
|---|---|
| Weight | 1 g |
| Material | Polyethylene |
| Dimensions | 17 x 8 x 12 mm |
